| YEAR |
VEHICLE DESCRIPTION |
| 1956-59 |
Spyder Giulietta |
| |
Note: This top is fastened to #1 &
#2 bows as well as front & rear bows, #1 & #2 bows are closer
together at the center than they are at the sides. The rear bar hooks on
to the rear deck. |
| 1959-63 |
Spyder 2000 |
| |
Note: Center deck & rear curtain
are one piece |
| 1960 |
Spyder |
| |
Note: Rear bar bolts on to rear deck |
| 1961 |
Spyder |
| |
Note: An extra wide flap extends from
the rear bow to the front bow on the inside, it gives the appearance of a
headliner. |
| 1962-63 |
Spyder |
| |
Note: This top is fastened to #1 &
#2 bows. The forward edge of the side quarters might be rivited to a plate
that extends down from the top frame just behind the windshield post. |
| 1963-64 |
Spyder |
| |
Note: This top has a special rubber
extrusion fastened to the top above the side window (extrusion not
supplied) |
| 1964-68 |
2600 - Roadster |
| |
Note: Top has a zipper curtain,
headliner and padded bows. |
| 1965-66 |
Spyder |
| |
Note: This top is the same as 1964,
but has a padded rubber and velvet cushion under the side flaps in place
of a rubber extrusion. A metal clip is riveted in between the flap and the
top in the front. |
|
1967-70
|
Duetto, 1600 - 1750 Spider Top assembly with plastic
window |
| 1971-94 |
1750, 2000 Spider, Spider Veloce, Graduate &
Quadrifogio Top with plastic window & padded quarters |
| 1995-on |
GTV Spider Top assembly with plastic window |
| 1995-99 |
GTV Spider Headliner assembly Material: Dane Cloth |